Centaur 1081D - the motor-block in which quality and the price are combined. On the quality allow you to say positive customer reviews. This model belongs to the class of heavy motoblocks. That is why it copes without problems with a high level of loads. Let us consider in detail the technical characteristics of the centaur 1081D motoblock, as well as the features of operation and some difficulties that may be encountered in the work.
Description
Diesel walking tractor Centaur 1081D designed to work on all types of soil. It is in demand among those who have large plots. In previous models of tillers there was only one clutch disc, which affected the service life. But the model 1081D is equipped with a double-disc clutch, which allows it to move smoothly even on heavy soil. 
The centaur 1081D is famous for the combined eight-speed gearbox for working on different soils and with different attachments. The maximum speed of 1081D is 21 km / h, and the minimum is 2 km / h. At the same time, the working unit of the box is protected from overload by a dry-type ring clutch, which enables or disables the drive to the gearbox. Gear shift is carried out manually. The reliability of the drive is determined by the V-belt transmission.
The Centaur 1081D is equipped with a three-position steering wheel, which is easily adjustable for both mounted structures and for operation without them. This model is different and its ability to adjust the position of the plowshare relative to the walker. This allows you to plow the track from the wheels and cultivate the land near fences and greenhouses. One of the main advantages of the 1081D motoblock is an electric starter. But the mechanism can be started manually.
Did you know? They talked about the tillers in the early 20th century. Then the first prototype of the mechanism appeared, and a patent for it was issued to a Swiss national. But now China is considered the country where the largest number of motor-blocks is produced and used.
Specifications 1081D
Technical characteristics of the centaur 1081D motoblock include many improvements. For example, the drive improved. The V-belt drive now consists of two B1750 belts and a 1-disc clutch. Also increased the mass of possible equipment. In the previous model 1080D it was only 210 kg, and for the 1081D motor-block it was already 235 kg. 
So, the main characteristics:
| Engine | diesel single-cylinder four-stroke R180AN |
| Fuel | diesel |
| Maximum power | 8 hp / 5.93 kW |
| Maximum crankshaft speed | 2200 rpm |
| Engine capacity | 452 cm cube |
| Cooling system | water |
| Fuel tank capacity | 5.5 liters |
| Fuel consumption (maximum) | 1.71 l / h |
| Cultivation width | 1000 mm |
| Cultivation depth | 190 mm |
| Number of gears forward | 6 |
| Number of gears back | 2 |
| Ground clearance | 204 mm |
| Transmission | gear bevel gearbox |
| Pulley | three-legged |
| Coupling type | dual dry-type with constant friction clutch type |
| Track width | 740 mm |
| Cutter width | 100 cm (22 knives) |
| Knives rotation speed | 280 rpm |
| Wheels | rubber 6.00-12 " |
| Dimensions tiller | 2000/845/1150 mm |
| Engine weight | 79 kg |
| Weight tiller construction | 240 kg |
| The amount of lubricating oil in the gearbox | 5 l |
| Brake | ring type with inner pads |
Read also about Neva MB 2, Salyut 100, Zubr JR-Q12E motoblocks.
Full set
AT full package includes: complete motoblock assembly, swivel plow and active tillers, instruction manual. The turning plow processes the soil in hard-to-reach places. The depth of its processing 190 mm. Active pochvofreza equipped with saber knives, which allow you to completely remove the weeds during loosening and mixing soil.
Features of operation
Before full operation it is necessary to run in the car. Refill the 1081D with oil and fuel, check all of the smoothing elements. Then give the tiller a load at each of the speeds. The load must be different so that the diesel engine adapts and can work at maximum load already on the site.
In the process of running, pay attention to the good steering and brakes. Do not forget to check the degree of tension of the drive belt and pressure in the wheels, they must be those parameters that are specified in the instructions.
How to use the walker
All models of the company "Centaur" are considered to be of high quality and are used for various purposes. However, do not forget about basic rules of operation of the motor-block:
- Watch the oil level in the engine and gearbox.
- Regularly check the condition of all filters of the machine, if necessary, clean and replace them.
- Do not use cutters on stony ground.
- Although the engine is protected by a cast-iron crankcase, in any case, carefully remove the pollution on it and on other parts of the motoblock. Pay attention to the wheels - too much dirt may get clogged in a deep tread.
- Work at low temperatures outside requires a warm engine. Add two cubes of mineral oil (using a syringe) to it.
- Check all tightening elements (screws, bolts, etc.).
- Initially, warm up the engine motoblock if you plan a large load on it.
Important! By law, you are not required to have any category of driver's license to control the motorblock.
Possible faults and their removal
Consumers say various problems in the work of the cultivator. These include clutch problems, engine and cooling system malfunctions, and more. But the timely repair of the centaur 1081D motoblock will allow troubleshooting in the initial stages.
Sometimes it is necessary to reconfigure the brake system, i.e., adjust the spring. This happens in case of problems with the transmission. Then it is important to check each speed setting separately.
There are problems with the drive belt. To solve this, it is necessary to reconsider the position of the engine itself or adjust the tension.
Problems with the clutch can be seen only when it is slipping or incomplete release. To fix this, you need to thoroughly clean all clutch elements or replace the friction disc.
Important! Pay attention to the unusual noise in the engine. This may prompt you to a mechanism malfunction.
The main tasks on the site
Centaur 1081D successfully copes with the work on the site with attachments. The machine allows the use of a plow, a potato digger, a water pump, a seeder, a potato planter, a cultivator and a trailer. Work with various equipment is provided with a gear reducer and four power take-off options.
Learn how to make a do-it-yourself adapter and a potato digger for a motoblock.
The centaur 1081D will allow you to mow the grass, dig up roots and carry cargo (model carrying capacity is estimated to 1000 kg on an asphalt road). The manufacturer manufactures and attachments for snow removal, as well as shredders. Model 1081D will be able to level your site quickly and efficiently. Summer residents give their preference to the motoblock due to the fact that it can be easily deployed in a small area, as well as through a narrow gate.
Advantages and disadvantages of the model
The centaur 1081D has many advantages, one of which is to unblock the differential. This feature allows you to turn off the drive of each wheel in place and it is easy to deploy the tiller 360 °. By clicking on the handles of the differential, which is located on the steering wheel, you will block one wheel, the second will continue to rotate.
The machine also has a low fuel consumption due to work at low revs (800 ml per motochas).
Many gardeners prefer the Centaur 1081D because of its water cooling, which allows you to work on the site for 10 hours. So you can, for example, plant potatoes on a plot of 2 hectares in the shortest possible time. After all, do not have to stop work so that the machine is cooled from overheating. 
An undoubted advantage is the steering wheel, which is easy to turn even with attachments. In addition, the design of the car without any problems goes on the road.
One of the main advantages of this model is chevron tread wheels. They allow to work with the motor-block on any soils.
The only drawback of this model is the relatively high cost of maintenance and attachments.
Centaur 1081D will be a great help on a large plot. The machine has many functions, including sowing and harvesting, eliminating weeds and even snow removal. Combined gearbox, improved radiator and large wheels allow to work on different types of soil and spend a minimum amount of time on it. The main thing - to carry out timely maintenance to maintain the mechanism in working condition.
