GREENHOUSES "INNOVATOR - MAXI", "MINI" - A DETAILED DESCRIPTION

Small greenhouses are beautiful alternative to massive and expensive greenhouses, for which it is sometimes difficult to find a suitable place in small suburban areas.
Small greenhouses easy to install, mobile, have relatively low cost. Thanks to these qualities, they are becoming increasingly popular among gardeners.

One of the most convenient to use and at the same time reliable is the greenhouse. "Innovator".

"Innovator - Maxi"

It was created at the request of the owners of small plots who are unable to install on them such a bulky structure as a stationary greenhouse. Possessing all the protective properties of the greenhouse, the greenhouse "Innovator - Maxi" is easy to installeasily moves to a new place.

At the same time it can accommodate quite a large number of plants. If you purchase several copies of this design, then each of them can be used for a particular type of vegetables or for growing seedlings.

Perfectly fit these models for growing all heat-loving crops; tomatoes, cucumbers, peppers, eggplants.

The advantages of the model are:

Lightweight design.
Possibility of installation without the use of special tools.
High structural strength.
Compactness.
Convenience in the care of plants, thanks to the design of the cover.
Sustainability.

Frame made of metal profile 20Х20, with polymer powder coating, having high resistance to environmental effects. Base the greenhouse is mounted in just 1 hour, all the parts required for assembly are included in the delivery.

Double-sided cover - one of the main advantages of the model. This method of opening is particularly convenient for the care of plants. Spherical coating design contributes dispersion of sunlight which favorably affects the condition of the plants. Moreover, this form provides a good rolling water flows during the rain.

The Novator - Maxi hotbed has the following dimensions:

1.1 m wide
length - 2.1 m.
height - 1.2 m.

The greenhouse top cover is offered in two options: polycarbonate or Agrotex 60.

Included for installation fixing pegs, without prior installation of the foundation.

"Innovator - Mini"

Differs from the previous model in smaller height (0.8 m), therefore it is more suitable. for growing seedlings or stunted vegetables. Also "Innovator - Mini" - ideal design for growing cucumbers. The depth and length of this model is the same as that of the Maxi model.

Due to its low altitude, the interior of this model warms up quickly at the onset of the first warm and sunny days.

This greenhouse is ideal for growing seedlings.

In addition, the greenhouse "Novator - Mini" hinged lid. Model light (20 kg), disassembled, it can be transported in a passenger car.

With the onset of small frost it can easily be covered additionally to protect transplanted seedlings from the cold.

Frame made of metal profile powder painted or unpainted galvanized pipes. The coating is made of polycarbonate. The kit includes all the necessary accessories for the assembly, so the greenhouse is simple to install.

The whole set consists of 8 pipes, 4 pegs for installation, a set of self-tapping screws, handles. For ease of assembly attached detailed factory instructions.

Also on our site there are more articles about the types of greenhouses: Accordion, Dayas, Gherkin, Snail, Breadbox and other cultures.

Secrets of building greenhouses

Assembly begin with mounting base. Metal profile is connected with screws. Lateral arched parts are connected and sheathed with polycarbonate. Then they are joined by cross bars: two lower and one upper in the central part of the greenhouse.

Then produced cover assembly(or two covers for the model "Maxi"). Ready lined with polycarbonate sheets covers are planted on special mounts at the base of the greenhouse. Pegs are fastened to the base.

Some issues of proper assembly:

The main difficulty of assembly is wrong side screed assembly. If you confuse the side and top jumpers, the dimensions of the cover and base will not match. For the base are short jumpers, and for the cover - long. Each jumper consists of two parts, connecting them, you need to compare the length and check if the holes match. A discrepancy of more than 4 mm will cause the roof to skew and it will not fit snugly.
Pegs to fix a greenhouse in the ground is necessary set strictlyotherwise, the whole structure will skew, and the lid will not close.
Do not try to fit the lid close. Clearances of 2-5 centimeters are provided for ventilation internal space.

TIP. For long service greenhouse in winter time Keep the lid closed. Regularly clean the surface of snow.

Greenhouses "Novator" will become your reliable assistants in the cultivation of various garden crops on your site and with proper maintenance will serve you for many years.